Fire Shutter
Direct Drive / Tube Operated
Indupart offer a wide range of 1, 2 & 4 hour fire shutters to suit your application.
Our fire shutter range offer peace of mind in that they are tested to the latest standards and comply with all current CE marking regulations and directives.
1 Hour Rated
The FS60 fire shutter has been tested at Exova Warringtonfire under BS EN 1634-1:2008 test conditions, and assessed to BS EN 476-22:1987, to contain fire within particular parts of a building for 1 hour. All shutters can be connected to a fire alarm so they automatically descend by operation of the motor.
Applications
High security commercial and service sites, up to 50m². The FS60 fire shutter has been tested at Exova Warringtonfire under BS EN 1634-1:2008 test conditions, and assessed to BS EN 476-22:1987, to contain fire within particular parts of a building for 1 hour. All shutters can be connected to a fire alarm so they automatically descend by operation of the motor. Further fail-safe devices for higher levels of response to a fire outbreak or alarm are available. Suitable for internal or external face or reveal fit.
Curtain Slat
To guarantee the quality and safety of industrial doors, the European Commission has established (European) guidelines in the EN 13 241 1:2003 standard. All of our sectional overhead doors meet the requirements specified in this CE NEN standard. This has been determined by the accredited Swedish research centre SP Technical Research Institute of Sweden.
Casing
Galvanised steel casing and end plates as standard. Larger shutters incorporate barrel support frame where required (indicated on pricing tables). N.B. Reveal fix installations are supplied with a fascia as standard.
Finish: Galvanised finish as standard. Option to powder coat any RAL / BS colour or to choose from a range of plastisol finishes.
Details
Bottom Rail: Galvanised steel ‘T’ shaped bottom rail.
Guide Channels: Galvanised steel guide channels. Width of 65mm, 75mm or 100mm. Windlocking guides and slat-ends available.
Guide Channel Finish: Galvanised finish as standard.
Option to powder coat any RAL / BS colour.
Guide Height
a. 2500mm
b. 4000mm
c. 6000mm
Plate Size
a. 305mm
b. 355mm
c. 400mm
All plate sizes shown as a guide only and may vary.
Operation
Electric, Tubular: Tubular motor with rocker or external key switch as standard and safety brake as appropriate to comply with legislation. Manual override facility and crank handle as require. Electric, Outboard: Single phase inline chain driven motor (three phase option available) with push button control, chain override, fusible link and solenoid release as standard.
All shutters can be connected to a fire alarm via an interface panel so they automatically descend in the event of an alarm signal.
CE compliant to all applicable directives and regulations.
2 Hour Rated
The FS120 fire shutter has been tested at Exova Warringtonfire under BS EN 1634-1:2008 test conditions, and assessed to BS EN 476-22:1987, to contain fire within particular parts of a building for 2 hours. All shutters can be connected to a fire alarm so they automatically descend by operation of the motor.
Applications
High security commercial and service sites, up to 50m². The FS120 fire shutter has been tested at Exova Warringtonfire under BS EN 1634-1:2008 test conditions, and assessed to BS EN 476-22:1987, to contain fire within particular parts of a building for 2 hours. All shutters can be connected to a fire alarm so they automatically descend by operation of the motor. Further fail-safe devices for higher levels of response to a fire outbreak or alarm are available. Suitable for internal or external face or reveal fit.
Curtain Slat
Single skin 76mm curved steel with a thickness 0.7mm, 0.9mm, or 1.2mm, depending on overall opening size.
Finish: Galvanised finish as standard. Option to powder coat any RAL / BS colour.
Visible Face: 76mm
Weight per m²: 9.8kg (0.7mm thickness), 12.5kg (0.9mm thickness), 16.7kg (1.2mm thickness)
Maximum Width: 12000mm*
Maximum Area: 24m² (tubular), 50m² (inline)
*Size limitations vary dependent on motor and barrel support requirements. Larger sizes may be available on request.
Curtain Slat
Galvanised steel casing and end plates as standard. Larger shutters incorporate barrel support frame where required (indicated on pricing tables). N.B. Reveal fix installations are supplied with a fascia as standard.
Finish: Galvanised finish as standard. Option to powder coat any RAL / BS colour or to choose from a range of plastisol finishes (surcharges apply).
Guide Height
a. 2500mm
b. 4000mm
c. 6000mm
Plate Size
a. 305mm
b. 355mm
c. 400mm
All plate sizes shown as a guide only and may vary.
Details
Bottom Rail: Galvanised steel ‘T’ shaped bottom rail.
Guide Channels: Galvanised steel guide channels. Width of 65mm, 75mm or 100mm. Windlocking guides and slat-ends available.
Guide Channel Finish: Galvanised finish as standard.
Option to powder coat any RAL / BS colour.
Operation
Electric, Tubular: Tubular motor with rocker or external key switch as standard and safety brake as appropriate to comply with legislation. Manual override facility and crank handle as required. Electric, Outboard: Single phase inline chain driven motor (three phase option available) with push button control, chain override, fusible link and solenoid release as standard.
All shutters can be connected to a fire alarm via an interface panel so they automatically descend in the event of an alarm signal.
CE compliant to all applicable directives and regulations.
4 Hour Rated
The FS240 fire shutter has been tested at Exova Warringtonfire under BS EN 1634-1:2008 test conditions, and assessed to BS EN 476-22:1987, to contain fire within particular parts of a building for 4 hours. All shutters can be connected to a fire alarm so they automatically descend by operation of the motor.
Applications
High security commercial and service sites, up to 50m². The FS240 fire shutter has been tested at Exova Warringtonfire under BS EN 1634-1:2008 test conditions, and assessed to BS EN 476-22:1987, to contain fire within particular parts of a building for 4 hours. All shutters can be connected to a fire alarm so they automatically descend by operation of the motor. Further fail-safe devices for higher levels of response to a fire outbreak or alarm are available. Suitable for internal or external face or reveal fit.
Curtain Slat
Single skin 76mm curved steel with a thickness 0.7mm, 0.9mm, or 1.2mm, depending on overall opening size.
Finish: Galvanised finish as standard. Option to powder coat any RAL / BS colour.
Visible Face: 76mm
Weight per m²: 9.8kg (0.7mm thickness), 12.5kg (0.9mm thickness), 16.7kg (1.2mm thickness)
Maximum Width: 12000mm*
Maximum Area: 24m² (tubular), 50m² (inline)
*Size limitations vary dependent on motor and barrel support requirements. Larger sizes may be available on request.
Casing
Galvanised steel casing and end plates as standard. Larger shutters incorporate barrel support frame where required (indicated on pricing tables). N.B. Reveal fix installations are supplied with a fascia
as standard. Finish: Galvanised finish as standard. Option to powder coat any RAL / BS colour or to choose from a range of plastisol finishes (surcharges apply).
Guide height
a. 2500mm
b. 4000mm
c. 6000m
Plate Size
a. 305mm
b. 355mm
c. 400mm
All plate sizes shown as a guide only and may vary.
Details
Bottom Rail: Galvanised steel ‘T’ shaped bottom rail.
Guide Channels: Galvanised steel guide channels. Width of 65mm, 75mm or 100mm. Windlocking guides and slat-ends available.
Guide Channel Finish: Galvanised finish as standard.
Option to powder coat any RAL / BS colour.
Operation
Electric, Tubular: Tubular motor with rocker or external key switch as standard and safety brake as appropriate to comply with legislation. Manual override facility and crank handle as required. Electric, Outboard: Single phase inline chain driven motor (three phase option available) with push
button control, chain override, fusible link and solenoid release as standard.
All shutters can be connected to a fire alarm via an interface panel so they automatically descend in the event of an alarm signal.
CE compliant to all applicable directives and regulations.
